 |
1. STAGE
After the surface is cleaned, on which isolation is going to applied, sub profiles are put. And it is provided that Öz Siding panels are lined up correctly horizontally. Every 6 meters one profile assembly is repeated. |
 |
2. STAGE
To the backside of the Öz Siding panels along the corners and at 8 points Öz Siding Adhesive is applied. Thus adherence is provided from all points. |
 |
|
 |
3. STAGE
Öz Siding house press panels are adhered to the surface of walls. Vertical placecs should not be confused. Overflowen plasters should be cleaned. In and outside corners ara joined with a special tool at 45 degree angles. |
|
4. STAGE
In additional vertical places, alkalic resistible fluid nets are applied which are 10 cm in wide and at least 145 gr/m2 weight. |
 |
|
 |
5. STAGE
In stair fronts of Öz Siding house press panels, Öz Siding Z Profiles are fixed with Öz Siding Adhesives in order to produce standart plaster thickness which increases resistance. |
|
6. STAGE
As a filling Öz Siding Fiber Plaster is applied for the first layer, and Öz Siding Flat Plaster for the second layer. |
 |
|
 |
7. STAGE
To the centres of door and windows Öz Siding Flat Fittings are applied, which are flat horizontally and house press staired in backside, with Öz Siding Adhesives. Onto this alkalic resistant plaster net is applied which is at least 145 gr/m2 in weight. At the corners corner profiles are put and two times Öz Siding Flat Plaster is applied. |
|
8. STAGE
To the outer edges, Öz Siding Flat Fittings are put with Öz Siding Adhesive in its own tool.Onto this alkalic resistant plaster net is applied which is at least 145 gr/m2 in weight.At the corners corner profiles are put and two times Öz Siding Flat Plaster is applied. |
 |
|
 |
9. STAGE
Öz Siding Exterior Side House Press System application is completed after being painted with acrilic based or siliconised exterior side paint at your own choice. It is advised to have lining before paint is applied.
|
